Shine Pro

Shine Pro Video

The “Shine Pro” is a revolutionary, time-saving device for cleaning and buffing those chrome or aluminum wheels on 18 wheelers and motor homes.  Works well if you wash the wheels and apply the wax by hand, then use the “Shine Pro” to polish the wheels in minutes to a high gloss.  Better yet, buy the 2 pack…one for applying the wax; one for polishing!!  Some manual touch-up may be necessary depending on wheel/lug nut design.  Accomplish tedious jobs in minutes instead of hours!  The Shine Pro has many other uses as well like polishing granite or Corian counter tops, exterior chrome/stainless steel accessories like body armor, stainless steel or aluminum sinks, inside of microwave/convection ovens ete, etc.  The “Shine Pro” easily fits into the chuck of any 3/8″ or larger electric drill.  Cordless drills are recommended  to eliminate any possibility of electrical shock.  When you’re done, just run the device in a bucket of clean  water and let it dry.  The Shine Pro is sold as single unit or 2-pack kit.  Single units are $29.95 plus $10.00 shipping.  The 2-pack is $49.95 plus $10.00 shipping.  Replacement mitts are $7.95 (plus $5.00 shipping/handling if purchased separately).  Note:  Any time I’m able to combine orders in the same package, excess shipping fees will be immediately credited back to the buyer!!

 

Congratulations on your purchase of the amazing Shine Pro!!

 The Shine Pro is a revolutionary new device which has a wide variety of applications.  You can use it to wax and polish those 22.5 inch chrome and aluminum wheels on today’s’ luxury motor coaches and 18-wheelers.  It can also be used to polish any chrome or aluminum equipment  like bumpers, RV body armor, sinks, and interior of convection ovens and microwaves just to mention a few.  Shine Pro will not scratch or damage surfaces, however, as with any buffing device, prolonged use in one spot can damage painted surfaces. 

Simply insert the Shine Pro in the chuck of any 3/8” or larger drill.  Use one hand on the drill and the other on the tool’s slip ring for maximum control at all times.  Pushing slightly forward on the slip ring will afford the operator better control and eliminate excessive wear on the tool’s end cap. The hollow cavity at the top of the Shine Pro is designed to fit over lug nut covers.    If the slip ring should get hot due to excessive pressure application, the tool should be allowed to cool. You should alternate the tool’s rotation (switch from forward to reverse) periodically to minimize excessive wear in one direction.  NOTE:  Some manual touch-up may be necessary depending on the particular task; however, the net result will be a very significant time savings.   

When you are done polishing, clean-up is a snap.  You can either run the Shine Pro’s  synthetic lambskin mitt in a bucket of clean water or, if really dirty, carefully remove the mitt  from the tool (without disturbing the foam underneath) and use a liquid soap/mild degreaser to more thoroughly clean.  The use of an air or battery powered drill is recommended to avoid any possible ELECTRICAL SHOCK.

Note:  Use care when changing mitts to avoid damaging the glued on foam underneath.  Place the tool securely in a vise with the mitt end up.  Then, with both hands stretch the elastic band of the mitt out and over the foam without tearing the foam.  The foam gives the mitt its unique shape.  Temporarily out of stock.

Order Shine Pro Polisher

Comments are closed.